Tulsa Plumbing and Air logoTulsa Plumbing & Air

Plumber in Tulsa, OK

A licensed Tulsa plumber fixes leaks, water heaters, sewer lines and drains. Most service calls in Tulsa start with a $75 to $150 trip and diagnosis fee. Tell us what is wrong and your ZIP code, and a local plumber calls you back with a price.

  • Upfront price ranges
  • Licensed local pros
  • Tulsa County ZIPs only

Get a free quote

Takes 30 seconds. We share your request with a local pro.

Do you own the home?
Licensed plumber tightening a copper drain pipe under a kitchen sink in a Tulsa, OK home
Plumber in Tulsa, OK: typical work a licensed Tulsa-area pro handles.

Plumbing problems we handle in Tulsa

Most Tulsa plumbing calls fall into five groups: water heaters, leaks, drains, sewer lines and fixtures. Each one has its own page with prices, warning signs and the repair steps, so you can read only the part that matches your problem.

  • Water heater installation: tank and tankless units, 40 to 50 gallon sizes, permit and haul-away.
  • Leak detection: hidden leaks in walls, under slabs and in yard lines, found with acoustic and thermal tools.
  • Sewer line repair: root intrusion, collapsed clay pipe and belly sections, found with a camera.
  • Drain clogs: kitchen, bathroom and main line clogs cleared with a cable machine or hydro-jetting.
  • Fixtures: toilets, faucets, garbage disposals and shut-off valves.

Questions to ask before approving plumbing work

  • What exactly failed, and can you show me?
  • Is this covered by a manufacturer or prior-plumber warranty?
  • What is the total price including parts, labor and any permit fee?
  • Will you patch drywall or concrete, or is that on me?
  • How long is the labor warranty on this repair?

Fixture replacement guidance

Toilets, faucets and garbage disposals are the plumbing items homeowners replace most often. A standard two-piece toilet installed runs $250 to $550 including the unit and labor to remove the old one and seal the new wax ring. A kitchen faucet swap runs $150 to $400 depending on whether the supply lines and shutoff valves also need replacing, which is common on faucets over 15 years old.

A garbage disposal replacement runs $200 to $450 installed, more if the electrical connection or mounting ring needs updating. Ask the plumber to check the shutoff valves under every sink during any fixture visit; valves that have not been turned in years often seize or leak the first time they are moved.

Want a real price for your home?

Get a quote

Typical plumbing prices in Tulsa

These are typical ranges for the Tulsa area. Your plumber gives a written price after seeing the job. Ask for that price before work starts.

JobTypical range
Service call and diagnosis$75 – $150
Clear a sink or tub drain$150 – $300
Main line clog (cable)$200 – $450
Tank water heater replaced (installed)$1,400 – $2,800
Leak detection visit$250 – $500
Sewer line spot repair$1,500 – $4,500

Winter plumbing in Tulsa

Tulsa gets several nights below 20°F most winters, and the February 2021 cold wave dropped temperatures below zero for days. Pipes in exterior walls, crawlspaces, unheated garages and attics freeze first.

  • Disconnect garden hoses and close the inside valve for each outdoor faucet before the first freeze.
  • Open sink cabinet doors on outside walls during hard freezes.
  • Let a pencil-thin stream run from the faucet farthest from the main valve.
  • Keep the thermostat at 55°F or higher if you leave town.
  • If a pipe freezes, close the main valve before it thaws, then call a plumber.

What a written plumbing quote should include

  • The exact work: what gets replaced, the pipe material, and the fixture or unit model.
  • Permit fee, if the job needs a City of Tulsa permit.
  • Whether drywall or concrete patching is included or left to you.
  • Labor and parts warranty terms in writing.
  • Total price, so you can compare two plumbers line by line.

How to check a plumber's Oklahoma license

Every plumber in Tulsa who works on water, drain or gas piping must hold a license from the Oklahoma Construction Industries Board (CIB). The CIB website has a free public search: type the plumber's name or license number and it shows whether the license is active, the license class (journeyman or contractor) and the expiration date.

A plumbing contractor license also requires proof of liability insurance on file with the CIB. Ask the plumber for the license number before the visit, and check that the name on the license matches the company name on the invoice.

Tulsa city water and what it means for your pipes

Tulsa homes on city water get it from Lake Oologah and the Spavinaw and Eucha lakes, treated at the Mohawk and A.B. Jewell plants. The water is moderately hard, so a plumber in Tulsa often finds scale inside water heater tanks, faucet aerators and shower valves in homes that have no softener.

Flushing a tank water heater once a year removes most of that sediment. If your water pressure is above 80 PSI at an outside spigot, the fix is to install or replace a pressure-reducing valve, which typically costs $250 to $550 in Tulsa.

When to call a plumber the same day

Before the plumber arrives, close the main shut-off valve. In most Tulsa homes it sits where the water line enters the house, often in the garage or a front crawlspace. The meter-side valve in the curb box belongs to the City of Tulsa.

  • Water is running and you cannot stop it at the fixture valve.
  • There is a gas smell by the water heater: get out and call ONG at 1-800-458-4251 first.
  • Sewage is coming up in a tub, shower or floor drain.
  • A water heater is leaking from the tank body, not just a fitting.
  • Your water bill jumped with no change in use, or you hear water running when everything is off.

How to check a Tulsa plumber before you hire

A plumber who will not give a license number or hesitates on insurance is a warning sign. Oklahoma requires a state plumbing license for anyone doing plumbing work for pay, and the CIB site lets you confirm it is current before anyone steps inside your house.

  • Ask for the Oklahoma plumbing license number and look it up on the Construction Industries Board (CIB) website.
  • Ask for proof of liability insurance, not just the license.
  • Get the price in writing before work starts, not a verbal estimate over the phone.
  • Ask what the warranty covers: parts, labor, or both, and for how long.
  • Check for a local business address, not just a cell phone number.

Why Tulsa homes have these problems

Tulsa sits on clay soil that swells when wet and shrinks in dry summers. That movement cracks slab plumbing and old sewer pipe. Many Midtown and Brookside homes built before 1970 still have clay or cast iron sewer lines and galvanized supply pipe, which rust and clog with age.

Winter ice storms and hard freezes can split pipes in exterior walls and crawlspaces. In summer, attic and garage water heaters work in heat above 100°F, which shortens the life of valves and seals.

Pipe materials in Tulsa homes

The age of your house tells a plumber a lot before they open a wall. Homes built in Tulsa before 1960, common in Maple Ridge, Florence Park and Kendall-Whittier, often have galvanized steel supply pipe and cast iron or clay drain lines. Galvanized pipe rusts from the inside, so water pressure drops over the years and brown water shows up after the main is shut off and turned back on.

Homes from the 1960s to the late 1980s usually have copper supply lines. Some homes from about 1978 to 1995 have polybutylene, a gray plastic pipe that cracks at the fittings and was the subject of a national class-action lawsuit. Homes built after the late 1990s often use PEX, a flexible plastic pipe that handles freezing better than copper.

  • Galvanized steel: 40 to 60 year life, rust and low pressure. Plan to repipe.
  • Copper: 50 to 70 year life, pinhole leaks under slabs in clay soil.
  • Polybutylene: fails at fittings. Replace before it leaks.
  • PEX: 40 to 50 year expected life, fewer joints, flexible in a freeze.
  • Cast iron drain: cracks and scales inside after 50 to 75 years.
  • Clay sewer pipe: root intrusion at joints every 2 to 3 feet.

Water pressure problems in Tulsa homes

City of Tulsa water pressure runs higher in some neighborhoods than others, and pressure above 80 psi strains water heaters, washing machine hoses and toilet fill valves. A pressure-reducing valve (PRV) brings house pressure down to a safe 50 to 70 psi and costs $300 to $600 installed.

Low pressure in an older home, especially in Maple Ridge or Kendall-Whittier, often points to corroded galvanized pipe narrowing from the inside rather than a problem at the meter. A plumber checks pressure at an outside spigot with a simple gauge in under five minutes.

  • Test pressure with a $10 gauge from a hardware store on an outdoor hose bib.
  • Above 80 psi: ask about a pressure-reducing valve.
  • Below 40 psi in one fixture only: likely a clogged aerator or valve, not a house-wide issue.
  • Below 40 psi house-wide in an older home: ask about galvanized pipe condition.

Backflow prevention for Tulsa homes

A backflow preventer keeps dirty water, lawn chemicals or pool water from siphoning back into the clean water supply. Homes with irrigation systems, pools or a well connection in Tulsa often need one, and some require yearly testing by a certified tester under City of Tulsa cross-connection rules.

Ask your plumber whether your home already has one and whether it is due for its annual test. A failed test usually means a worn rubber seal inside the device, a $100 to $250 repair.

How the service works

  • Step 1: Send the quote form with your ZIP code and the problem. It takes about 30 seconds.
  • Step 2: A licensed plumber who serves your area calls you back to confirm the problem and a time.
  • Step 3: The plumber inspects the job and gives you a written price before starting.
  • Step 4: Say yes to the quote, the job is done, and you pay the plumber directly.

Repair or replace?

A tank water heater lasts about 8 to 12 years. If yours is past 10 years and leaking, replacement usually costs less over time than repairs. A sewer line with one cracked joint can get a spot repair, but a line with roots in many joints usually needs full replacement or a liner.

For supply pipes, one pinhole leak in copper is a repair. Repeated leaks in galvanized pipe mean the whole run is near the end of its life.

Plumbing service areas near Tulsa

Plumbers in this network cover Tulsa ZIP codes 74101 through 74137, plus 74145 and 74146, Broken Arrow, Owasso, Bixby, Jenks and Sand Springs. The form checks your ZIP code before you send it.

Before you book: Tulsa price and problem guides

Questions Tulsa homeowners ask

How much does a plumber cost in Tulsa?

Most Tulsa plumbers charge a $75 to $150 service call. Small repairs like a faucet or drain clog often total $150 to $350. Larger jobs like a water heater replacement run $1,300 to $2,800.

Do I need a permit for plumbing work in Tulsa?

Water heater replacement and most new piping need a City of Tulsa permit. A licensed plumber pulls the permit. Ask your plumber to confirm before the job starts.

Where is my main water shut-off?

In most Tulsa homes it is where the water line enters the house, often in the garage, utility room or crawlspace. Turn it clockwise to close it.

Can a plumber come today?

Same-day service depends on the plumber's schedule. Choose Today in the quote form so the plumber knows the job is urgent.

Are the plumbers licensed?

Oklahoma requires plumbers to hold a state license from the Construction Industries Board. Ask the plumber for the license number and check it on the CIB website.

Do you serve Broken Arrow and Owasso?

Yes. The network covers Tulsa, Broken Arrow, Owasso, Bixby, Jenks and Sand Springs.

Related services

Tell us the problem. We share your request with a licensed local pro.

Get a quote
Get a quote