Tulsa Plumbing and Air logoTulsa Plumbing & Air

Garage Door Spring Replacement Cost in 2026

Garage door spring replacement costs $150 to $300 for one torsion spring and $250 to $450 for both springs in 2026, including the service call. A broken spring is the most common garage door repair, and most jobs finish in under 2 hours once a technician arrives.

Last updated: October 2026

  • Upfront price ranges
  • Licensed local pros
  • Tulsa County ZIPs only

Get a free quote

Takes 30 seconds. We share your request with a local pro.

Do you own the home?
Tulsa, OK homeowner reviewing a written repair estimate with a technician at the front door
Garage Door Spring Replacement Cost in 2026: typical work a licensed Tulsa-area pro handles.

Average spring replacement cost by job

JobTypical cost
Service call$50 – $100
One torsion spring$150 – $300
Both torsion springs$250 – $450
Extension springs (pair)$130 – $280
Spring plus cable replacement$250 – $500
Heavy-duty spring (oversized or insulated door)$200 – $400

Garage door spring replacement cost: factors that change the price

  • Spring type: torsion springs cost more than extension springs but last longer and are safer.
  • One spring or two: most doors over 12 feet wide use two torsion springs. Replacing both adds $50 to $100 but saves a second visit.
  • Door size and weight: 8-foot-tall doors, wood doors and insulated doors need bigger springs.
  • Cycle rating: high-cycle springs add about $50 to $150 and roughly double the life.
  • Timing: night, weekend and holiday calls can add $50 to $150 to garage door spring replacement cost.
  • Extra parts: cables, rollers, bearings or drums found worn during the visit.

DIY parts price vs professional garage door spring replacement cost

Home stores sell a single torsion spring for about $30 to $100, and a pair with winding bars for about $80 to $200. A professional garage door spring replacement cost of $250 to $450 for a pair covers the right size measured on site, the tools, the risk and a warranty.

Most of the gap between parts and the professional price is labor and liability. A torsion spring holds enough force to break bones, and the wrong size spring makes the door heavy, which burns out the opener. That is why most home stores sell springs but do not install them.

Want a real price for your home?

Get a quote

Questions to ask about garage door spring replacement cost

  • What spring size, cycle rating and warranty does the price include?
  • Is the quote for one spring or a matched pair?
  • Is there a trip fee, and is it waived if I approve the work?
  • Which other parts do you recommend, and why?
  • Will you balance-test the door and check the opener force after the job?

Cost note on commercial-grade upgrades

A homeowner who opens the garage door many times a day, such as a home business with frequent deliveries, may benefit from a commercial-grade 25,000-cycle spring. It costs $50 to $100 more per spring than a standard residential spring but can last several times longer under heavy daily use.

Cost note on oversized and custom doors

An oversized door, like an RV bay or a commercial-style opening over 10 feet tall, needs a custom-wound spring that typically costs $50 to $150 more than a standard residential spring. These jobs also tend to take slightly longer since the technician often winds the spring on-site rather than installing a pre-made stock part.

Typical total cost including common add-ons

A homeowner replacing both springs plus worn cables and a bearing often totals $350 to $600 for the full visit, compared to $250 to $450 for springs alone. Asking for each item priced separately on the invoice makes it easier to see exactly what is driving the total above the base spring cost.

Average cost per spring across the Tulsa metro

Across Tulsa, Broken Arrow, Owasso, Bixby, Jenks, and Sand Springs, a single torsion spring commonly lands between $150 and $300 installed, with minor variation from travel distance and same-day scheduling. Extension spring pairs on older homes run slightly lower, typically $130 to $280 for both.

Cost by door weight and spring rating

Door typeSpring cycle ratingTypical cost (both springs)
Single lightweight steel10,000 cycles$200 – $350
Single insulated steel10,000 – 15,000 cycles$250 – $400
Double standard steel10,000 cycles$280 – $450
Double insulated or wood15,000+ cycles$350 – $550

How spring life is measured

A spring's cycle rating counts one full open-and-close as one cycle. A standard 10,000-cycle spring lasts about 7 to 10 years for a household opening the door 3 to 4 times a day. A 15,000 or 20,000-cycle spring costs a bit more upfront but can last 12 to 20 years for the same usage pattern, which lowers the lifetime cost per year of ownership.

Same-day vs scheduled spring repair pricing

A same-day emergency call for a broken spring, common since most people discover it trying to leave for work, sometimes carries a $25 to $75 premium over scheduling the repair a day or two out. Most companies still treat spring repair as a priority same-week job even without the emergency fee, since a broken spring leaves a car trapped inside or outside the garage.

Extension spring cost breakdown

Extension springs, found on many garage doors built before the 1990s, run along the horizontal tracks instead of a bar overhead. A pair typically costs $130 to $280 installed, a bit less than torsion springs, but many technicians recommend adding safety cables during replacement since broken extension springs can fly across the garage without them, adding $30 to $80.

What a written spring quote should include

  • Spring type (torsion or extension) and cycle rating.
  • Whether one or both springs are being replaced.
  • Service call fee and whether it is credited to the repair.
  • Any additional parts found during inspection, like cables, drums, or bearings.
  • A balance and safety test after installation.

Spring replacement vs new opener cost

A worn spring and a failing opener can show similar symptoms, like a door that will not open. Spring replacement runs $150 to $450, while a new opener runs $250 to $800 installed. A technician checks spring tension and balance first, since replacing the wrong part wastes money without fixing the real problem.

Why waiting to replace a broken spring costs more

An opener forced to lift a door with a broken spring works far harder than designed and can burn out the motor or strip the drive gear, turning a $150 to $450 spring job into a $250 to $800 opener replacement as well. Driving the door manually without a working spring also risks it slamming down suddenly, which can bend the track or damage the panels.

Cost by spring type

Torsion springs mount on a bar above the door and are standard on most garage doors installed in the last 20 years. Extension springs run along the horizontal tracks and are common on older doors. Torsion springs cost a bit more but last longer and are safer because they are contained in the mounting hardware.

A heavier door, like an insulated steel double door, needs a higher-rated spring, which costs more than the springs on a lighter single door.

Why both springs should be replaced together

Technicians recommend replacing both torsion springs at once even if only one broke, because they wear at the same rate from equal cycles. Replacing only the broken one often means a second service call within months when the other fails. The combined job costs less per spring than two separate visits.

Hidden costs to ask about

  • Permit: spring replacement almost never needs a permit, but full door replacement sometimes does. Ask your contractor to confirm if other work is bundled in.
  • Code or hardware upgrades: a worn drum, bent shaft, or bad bearing found during the job can add $50 to $150 each.
  • Cable replacement: cables often fray at the same time as springs and are worth replacing together for $100 to $200 more.
  • Haul-away: old spring and hardware disposal is typically included at no extra charge; confirm with your technician.

Repair vs replace: springs vs full door

Spring replacement is a repair, not a door replacement, and is almost always worth doing on a door with good panels and track. Replace the whole door instead if 2 or more panels are bent, the door has rust holes, or a single-layer steel door is over 20 years old. See full new-door pricing on our garage door installation cost guide.

How to save on spring replacement

  • Replace both springs together to avoid a second service call.
  • Ask for the spring's cycle rating; a 10,000-cycle spring usually costs a little more but lasts years longer than a 7,000-cycle spring.
  • Get the service call fee waived or credited if you approve the repair same visit.
  • Keep the garage door balanced and lubricated; a misaligned track adds strain that shortens spring life.
  • Avoid a technician who recommends a full opener or track replacement for a spring-only problem; get a second opinion for bundled quotes over $600.

Why springs break in Oklahoma homes

A standard torsion spring is rated for about 10,000 cycles, roughly 7 to 10 years for a household using the door 3 to 4 times a day. Many homes use the garage as the main entry, which shortens that lifespan. Temperature swings from summer heat above 100°F to winter lows in the teens stress the metal, and ice storms that freeze the bottom seal to the driveway add extra load when the opener pulls against it.

Problems that look like a broken spring

A door that will not open is not always a spring problem. A frayed or snapped cable, a door locked with the manual slide lock, a disengaged opener trolley or blocked sensors can all stop the door. Look for a visible gap in the spring above the door before paying garage door spring replacement cost. If the spring is in one piece, the fix may be cheaper: cable repair or a garage door opener fix often costs less than garage door spring replacement cost.

Bixby and Sand Springs service notes

Many Bixby homes along the Arkansas River were built in the 2000s or later with standard 10,000-cycle torsion springs that are now reaching typical replacement age. In Sand Springs, temperature swings near Keystone Lake and higher humidity can accelerate rust on older, unmaintained spring hardware, which sometimes means replacing worn bearings alongside the springs.

Signs a spring is about to break

  • The door feels noticeably heavier than usual when lifted manually.
  • A visible gap appears in the coils of a torsion spring above the door.
  • The door jerks or moves unevenly as the opener runs it up or down.
  • A loud bang from the garage, often the moment a spring actually snaps.

Safety: why this is not a DIY job

  • A torsion spring on a 2-car door holds enough tension to lift 150 to 250 pounds and can cause serious injury if wound or released without the right bars.
  • If a spring breaks, leave the door down and unplug the opener until a technician arrives.
  • Do not pull the red emergency release cord while a spring is broken; the door can fall suddenly.
  • A professional balances and tests the door and opener's safety reverse after the job, which a DIY repair usually skips.

What happens during the service call

  • The technician inspects the broken spring, the other spring, cables, drums, and bearings.
  • You get a written price before any work starts.
  • Old springs are removed and new ones are wound to the correct tension for your door's weight.
  • The door is tested for balance and the opener's auto-reverse safety feature is checked.

Questions Tulsa homeowners ask

How much does it cost to replace one garage door spring?

A single torsion spring typically costs $150 to $300 including the service call. Replacing both springs together runs $250 to $450.

Should I replace both springs or just the broken one?

Most technicians recommend replacing both since they wear evenly and the second one often fails within months of the first.

Can I replace a garage door spring myself?

This is not recommended. A torsion spring holds enough tension to cause serious injury. Leave the door down, unplug the opener, and call a technician.

How long does spring replacement take?

Most spring jobs finish in under 2 hours once the technician arrives with the correct springs for your door's weight.

Do garage door springs need a permit?

No, spring replacement alone almost never needs a permit. A permit may apply if you are replacing the full door at the same time.

Why did my quote include cable replacement too?

Cables often fray at the same age as the springs. Replacing both at once avoids a second visit and usually costs less combined.

How long do new springs last?

A standard torsion spring is rated for about 10,000 cycles, roughly 7 to 10 years of normal use.

Related services

Tell us the problem. We share your request with a licensed local pro.

Get a quote
Get a quote