Tulsa Plumbing and Air logoTulsa Plumbing & Air

Furnace Replacement Cost in 2026 (Oklahoma Prices)

Furnace replacement costs $3,500 to $7,000 installed in 2026 for a standard gas furnace sized for most homes. The price covers the unit, labor, ductwork connections, and a permit. Most installs take 4 to 8 hours and replace a unit 15 to 20 years old.

Last updated: October 2026

  • Upfront price ranges
  • Licensed local pros
  • Tulsa County ZIPs only

Get a free quote

Takes 30 seconds. We share your request with a local pro.

Do you own the home?
Tulsa, OK homeowner reviewing a written repair estimate with a technician at the front door
Furnace Replacement Cost in 2026 (Oklahoma Prices): typical work a licensed Tulsa-area pro handles.

Average furnace replacement cost by type

Furnace typeInstalled priceExpected life
Gas furnace, 80% efficiency$3,500 – $5,50015 – 20 years
Gas furnace, 95%+ efficiency$4,500 – $7,00015 – 20 years
Electric furnace$2,800 – $5,00015 – 20 years
Furnace plus new ductwork section$5,500 – $9,00015 – 20 years

The 50% rule: repair price vs furnace replacement cost

A common rule in the trade: if the repair price is more than 50% of the furnace replacement cost and the furnace is past 15 years old, replacement is usually the better spend. A $1,500 heat exchanger repair on an 18-year-old furnace is the classic case. A $250 igniter on a 9-year-old furnace is not.

AFUE efficiency and how it changes furnace replacement cost

Switching from 80% to a 95% furnace often adds new PVC venting and a drain, which raises the furnace replacement cost in older Tulsa homes. Fall, before the first cold snap, is usually the easiest time to lock in a furnace replacement cost, book, and compare quotes.

AFUE ratingVentingEffect on furnace replacement cost
80% (federal minimum for most gas furnaces)Metal flue through the roofLowest equipment price
90% to 92%PVC pipe, condensate drainAbout $800 to $1,500 more
95% to 98%PVC pipe, condensate drainAbout $1,200 to $2,500 more

Want a real price for your home?

Get a quote

Cost note on electric furnace replacements

An electric furnace skips gas lines and flue venting entirely, which simplifies installation in homes without existing gas service. It typically costs $2,800 to $5,000 installed, often less than a comparable gas model, but monthly operating costs usually run higher in Oklahoma winters since electric heat generally costs more per BTU than natural gas.

Cost difference between single-stage and two-stage furnaces

A single-stage furnace runs at full output every cycle and costs less upfront, fitting the lower end of the price ranges above. A two-stage furnace runs a lower output most of the time and shifts to full power only in the coldest weather, typically adding $500 to $1,200 to the installed price but improving comfort and lowering gas use over a winter season.

Average cost per square foot

Furnace replacement typically runs $2 to $4 per square foot of conditioned space once equipment, labor, and venting are included, though smaller homes often land above this per-square-foot range since base labor and permit costs stay fairly fixed regardless of size. A 1,800 sq ft home commonly totals near the middle of the $3,500 to $7,000 range.

Financing options for furnace replacement

Most HVAC companies offer financing plans spreading the $3,500 to $7,000 cost over 12 to 60 months. Zero-interest promotions are common for shorter terms, usually 12 to 18 months, while longer terms carry interest. Ask for the full payment schedule in writing before signing, including any early-payoff terms.

Furnace brands and warranty length

Common brands installed in Tulsa include Goodman, Trane, Carrier, and Lennox. Most new furnaces carry a 10-year parts warranty when registered within 60 to 90 days of installation, and a separate labor warranty from the installer, often 1 to 2 years, that is worth confirming in writing before the job begins.

Cost to replace furnace and AC together

Replacing a furnace and AC in the same visit typically saves $500 to $1,500 compared to two separate jobs, since labor, the Manual J load calculation, and ductwork inspection overlap. This combined replacement commonly runs $9,000 to $16,000 depending on size and efficiency tier, and avoids paying two separate permit fees in many cities.

Signs your furnace quote is too low

  • No written Manual J load calculation or stated BTU sizing for your square footage.
  • No mention of a permit fee when your city requires one.
  • No listed warranty terms for parts or labor.
  • A price far below $3,500 with no model number specified, which can signal a lower-tier or mismatched unit.

Gas line and venting cost considerations

A standard 80% efficiency furnace vents through an existing metal flue, keeping installation simple. A 95%+ high-efficiency furnace needs new PVC intake and exhaust venting through an exterior wall, typically adding $300 to $800 in materials and labor if the home never had this venting before. Homes converting from an older gas valve to a modern electronic ignition system sometimes need minor gas line adjustments as well.

What drives the price within each range

  • Efficiency rating: a 95%+ high-efficiency furnace costs more upfront but lowers gas bills and often needs new PVC venting instead of a metal flue.
  • Furnace size (BTU output): an undersized or oversized unit for your square footage wastes money either way; sizing uses a Manual J load calculation.
  • Attic or closet installs: tight spaces add labor time.
  • Ductwork condition: leaky or undersized ducts sometimes need sealing or resizing work alongside the furnace, adding $500 to $2,000.
  • Single-stage vs two-stage or variable-speed blower: multi-stage units cost more but run quieter and more efficiently.

Hidden costs: permit, code, haul-away

  • Permit: furnace replacement in most cities requires a permit and an inspection; your contractor should include this fee in the quote.
  • Code upgrades: older furnaces sometimes lack a proper combustion air supply or condensate drain, both added during replacement to meet current code.
  • Venting changes: switching to a high-efficiency furnace requires new PVC intake and exhaust vents through an exterior wall, which a standard furnace does not need.
  • Haul-away: removing the old furnace and any old ductwork sections is usually included; confirm it is in your written quote.

Thermostat upgrade costs during installation

  • Basic digital thermostat: $100 – $250 installed.
  • Programmable 7-day thermostat: $150 – $300 installed.
  • Smart Wi-Fi thermostat: $200 – $500 installed.
  • Zoning system with multiple thermostats: $800 – $2,500 added to the furnace job.

Owasso and Sand Springs installation notes

Homes in Owasso's Bailey Ranch and Coffee Creek areas (ZIP 74055) and in Sand Springs along Highway 412 often sit on larger lots, which can mean longer refrigerant and gas line runs during a combined furnace and AC job, adding modest material cost. Older homes in Sand Springs sometimes need ductwork resizing alongside furnace replacement due to additions built over the years.

Repair vs replace cost

A common rule: multiply the furnace's age by the repair estimate. If the total tops $5,000, replacement usually makes more sense. A furnace with a cracked heat exchanger always needs replacement regardless of age, since a cracked exchanger can leak carbon monoxide.

Common repairs like an igniter or flame sensor cost $150 to $450 and are worth doing on a furnace under 12 years old. A blower motor replacement runs $450 to $1,200 and is a closer call on furnaces past 15 years.

Signs you need a replacement

  • The furnace is 15 or more years old and needs a repair over $500.
  • You smell gas or see yellow (not blue) burner flames; this can mean a cracked heat exchanger and carbon monoxide risk.
  • The furnace short-cycles, turning on and off repeatedly without heating fully.
  • Energy bills have risen steadily while usage stayed the same.
  • Rooms heat unevenly despite thermostat settings being correct.

Furnace vs heat pump cost comparison

A heat pump costs more upfront for the outdoor unit but handles both heating and cooling, which can offset the price if your AC also needs replacement soon. A gas furnace heats faster in the teens-degree cold Tulsa winters bring and keeps working during a power outage if paired with a standby generator.

How to save on furnace replacement

  • Replace the furnace and AC together if both are near end of life; combined labor often costs less than two separate jobs.
  • Ask about manufacturer rebates on high-efficiency models, and check for utility rebate programs from PSO or ONG.
  • Get the Manual J load calculation in writing so you are not sold an oversized, more expensive unit than you need.
  • Schedule replacement in fall before the first hard freeze instead of waiting for a mid-winter failure, which can mean emergency pricing.
  • Compare at least two written quotes that separately list unit cost, labor, permit, and any ductwork work.

Why Oklahoma winters affect furnace costs

Winter lows in Tulsa often dip into the teens, and ice storms have cut power for days at a time, including the February 2021 cold wave that pushed temperatures below zero. Furnaces run long cycles for weeks at a stretch during these cold snaps, which is when older igniters, flame sensors, and blower motors tend to fail and push homeowners toward a full replacement instead of another repair.

Cost by home size and furnace output

Home sizeTypical BTU outputInstalled price range
Under 1,500 sq ft40,000 – 60,000 BTU$3,500 – $5,500
1,500 – 2,500 sq ft60,000 – 80,000 BTU$3,800 – $6,000
2,500 – 3,500 sq ft80,000 – 100,000 BTU$4,200 – $6,800
Over 3,500 sq ft100,000+ BTU or two-zone$5,000 – $7,500

What happens if your furnace fails mid-winter

  • Most companies prioritize no-heat calls in freezing weather, but response time can still stretch during a major cold snap when demand spikes across the city.
  • A temporary space heater can hold a small area while you wait, but never run one unattended or near flammable materials.
  • Ask about loaner units or rental furnaces if a full replacement cannot happen the same day during extreme cold.
  • Shut off the gas supply to the furnace if you smell gas, leave the house, and call ONG at 1-800-458-4251 before calling for repair.

What happens during furnace installation

  • The technician performs a load calculation and inspects existing ductwork and venting.
  • You receive a written quote listing the unit model, efficiency rating, and permit fee.
  • A permit is pulled before work begins.
  • The old furnace is disconnected, drained if needed, and removed.
  • The new furnace is set, connected to gas or electric, ductwork, and venting, then tested for proper operation and safety shutoffs.
  • The old unit is hauled away.

Next steps for Tulsa homeowners

Questions Tulsa homeowners ask

How much does furnace replacement cost in 2026?

A standard gas furnace replacement runs $3,500 to $7,000 installed, depending on efficiency rating and ductwork needs.

Is a high-efficiency furnace worth the extra cost?

Often yes if you plan to stay in the home 7+ years; a 95%+ efficiency furnace lowers gas bills but costs $1,000 to $1,500 more upfront, partly from new PVC venting.

What is the rule for repair vs replace on a furnace?

Multiply the furnace's age by the repair cost estimate; a result over $5,000 generally favors replacement. A cracked heat exchanger always means replacement.

Does furnace replacement need a permit?

Yes, most cities require a permit and inspection for furnace replacement. Your contractor should include this in the written quote.

How long does a furnace last?

Most gas furnaces last 15 to 20 years with regular maintenance like annual filter changes and a yearly inspection.

Can I replace just the blower motor instead of the whole furnace?

Yes, a blower motor replacement runs $450 to $1,200 and is worth it on a furnace under about 15 years old with no other major issues.

Why does my furnace quote include ductwork work?

Leaky or undersized ducts reduce a new furnace's efficiency. Sealing or resizing sections during installation can add $500 to $2,000 but improves performance.

Related services

    Tell us the problem. We share your request with a licensed local pro.

    Get a quote
    Get a quote